(248) 348-7800

sales@belknaptools.com

Printer-Friendly VersionPrinter-friendly version
Printer-Friendly Version

Contact Us

 Van F. Belknap Co., Inc.
29164 Wall Street
Wixom, MI 48393 USA
(248) 348-7800
sales@belknaptools.com

Printer-Friendly VersionNEED A SPECIALLY
DESIGNED TOOL?

You're at the right place! Belknap is the Leader in Specialty Torque Applications. Check out our Specialty Tools Gallery for a small sampling of what we've produced for our customers over the years.

Guarantee

Van F. Belknap Co., Inc. tools are guaranteed to perform the work for which they are designed, and to provide service for as long as is consistent with ordinary wear.

Any tools found defective in workmanship or material and returned to the factory with transportation charges pre-paid will be replaced, repaired or credited, provided it has been used for the purpose for which the tool was designed.

Our liability under our guarantee is limited to the foregoing. Tools that have been ground or altered in any manner by the user from their original design are not covered by this guarantee.

  • Spreader Pneumatic Driveshaft
    Assembly & Installation
    #18 Pneumatic Driveshaft
    Spreader
  • Install Tool Pneumatic Snap Ring
    Assembly & Installation
    #11 Pneumatic Snap Ring
    Install Tool
  • Setting Spacer Front Curb Height
    Fixtures
    #11 Front Curb Height
    Setting Spacer
  • Crowfoot Male Square Drive by Female Square Drive
    Crowfoot Adapters
    #1 Male Square Drive
    by Female Square
    Drive Crowfoot
  • Rubber Install Tool Cup Holder
    Material Handling
    #6 Cup Holder Rubber
    Install Tool
  • Torque Wrench Maxi-Break Click
    Torque Wrenches
    #14 Maxi-Break Click
    Torque Wrench
  • Hex Drive End VB2T-I Preset Torque Wrench
    Torque Wrenches
    #8 VB2T-I Preset Torque
    Wrench with Hex Drive End
  • Crowfoot Box Offset Female Square Drive
    Crowfoot Adapters
    #2 Box Offset Female
    Square Drive Crowfoot
  • Magnet Hand Socket Tool
    Sockets
    #16 Hand Socket
    Tool with Magnet
  • Pneumatic Install Tool AC Line
    Assembly & Installation
    #13 AC Line Pneumatic
    Install Tool
  • Drive End Non-Marring Pipe Wrench
    Drive Ends
    #24 Non-Marring Pipe
    Wrench Drive End
  • Drive End Adapter Hose Fitting End
    Drive Ends
    #30 Hose Fitting End
    Adapter Drive End
  • Install Tool Trunk Latch
    Assembly & Installation
    #9 Trunk Latch Install Tool
  • Interchangeable Tips Hand Hose Clamp Tool
    Hose Clamp Tools
    #5 Hand Hose Clamp Tool
    with Interchangeable Tips
  • Tool Hand Hose Clamp
    Hose Clamp Tools
    #8 Hand Hose Clamp Tool
  • Drive End Special Allen
    Drive Ends
    #21 Special Allen Drive End
  • Retainer Pneumatic Hose Clamp Tool
    Hose Clamp Tools
    #7 Pneumatic Hose Clamp
    Tool with Retainer
  • Drive End Allen Head
    Drive Ends
    #27 Allen Head Drive End
  • Extension Spring Loaded
    Sockets
    #9 Spring Loaded Extension
  • Interchangeable Tips Locking Hose Clamp Tool
    Hose Clamp Tools
    #4 Locking Hose Clamp Tool
    with Interchangeable Tips
  • Socket Adjustable Runoff Surface Drive
    Sockets
    #18 Surface Drive Socket
    with Adjustable Runoff
  • Drive End Install Fan
    Drive Ends
    #28 Fan Install Drive End
  • Hinge Pin Pneumatic Installer
    Assembly & Installation
    #30 Pneumatic Hinge Pin Installer
  • Tool Pneumatic Push Nut Install
    Assembly & Installation
    #17 Pneumatic Push Nut
    Install Tool
  • Fixture Drill Location
    Fixtures
    #4 Drill Location Fixture
  • Gauge AC Line Location
    Assembly & Installation
    #20 AC Line Location Gauge
  • Magnet Socket Shortened
    Sockets
    #20 Shortened Socket
    with Magnet
  • Square Drive Fast Lead Wobble Socket
    Sockets
    #11 Fast Lead Wobble
    Socket with Square Drive
  • B Shank V-Bottom Drive End
    Drive Ends
    #17 V-Bottom Drive End
    with B Shank
  • Fixture Window Button
    Fixtures
    #12 Window Button Fixture
  • Torque Wrench Large Octal Nut
    Torque Wrenches
    #7 Large Octal Nut
    Torque Wrench
  • Brake Bleeder Ratcheting
    Torque Wrenches
    #21 Ratcheting Brake Bleeder
  • Feeder Pneumatic Engine Pin Installer
    Assembly & Installation
    #2 Pneumatic Engine Pin
    Installer with Feeder
  • Drive End Special Formax
    Drive Ends
    #1 Special Formax Drive End
  • Drive End Torx Offset
    Drive Ends
    #3 Torx Offset Drive End
  • Tool Inline Pneumatic Hose Clamp
    Hose Clamp Tools
    #6 Inline Pneumatic Hose
    Clamp Tool
  • Removal Tool Breather Valve
    Assembly & Installation
    #1 Breather Valve
    Removal Tool
  • Automotive VIN Stamping Holding Fixture
    Fixtures
    #17 Holding Fixture for Stamping
    Automotive VIN
  • Speeder Open End Crowfoot
    Crowfoot Adapters
    #7 Open End Speeder
    Crowfoot
  • Drive End Spanner
    Drive Ends
    #15 Spanner Drive End
  • Fixture Thread Checker Holding
    Fixtures
    #2 Thread Checker Holding
    Fixture
  • Drive End Adjustable
    Drive Ends
    #14 Adjustable Drive End
  • Drive End Flare Nut Half Moon
    Drive Ends
    #10 Flare Nut Half
    Moon Drive End
  • Hose Clamp Tool Inverted
    Hose Clamp Tools
    #12 Inverted Hose Clamp Tool
  • Square Drive Torx
    Sockets
    #5 Torx with Square Drive
  • Drive End Pipe Wrench
    Drive Ends
    #6 Pipe Wrench Drive End
  • Reduced Thickness V-Bottom Drive End
    Drive Ends
    #9 V-Bottom Drive End
    with Reduced Thickness
  • Extended Socket Ratchet Slip-Torq
    Torque Wrenches
    #1 Ratchet with Slip-Torq
    and Extended Socket
  • Drive End Special
    Drive Ends
    #22 Special Drive End
  • Side Ink Marking Torque Wrench Formax Drive End
    Drive Ends
    #5 Formax Drive End
    for Side Ink Marking
    Torque Wrench
  • Square Drive Spring Loaded Socket
    Sockets
    #10 Spring Loaded Socket
    with Square Drive
  • Fixture VIN Plate Split
    Fixtures
    #5 VIN Plate Split Fixture
  • Special Offset Adapter Torque Wrench
    Torque Wrenches
    #19 Torque Wrench with
    Special Offset Adapter
  • Ratcheting Allen Head Drive End Torque Wrench
    Torque Wrenches
    #18 Torque Wrench with
    Ratcheting Allen Head
    Drive End
  • Clean Out Thread Tool
    Sockets
    #15 Thread Clean Out Tool
  • Adapter Allen Head
    Crowfoot Adapters
    #8 Allen Head Adapter
  • Male Hex U-Bottom Drive End
    Drive Ends
    #2 U-Bottom with Male
    Hex Drive End
  • Magnetic Inserts Non-Marring Hand Tool
    Material Handling
    #2 Non-Marring Hand Tool
    with Magnetic Inserts
  • Tool Shaft Indexing
    Assembly & Installation
    #21 Tie Rod Adjusting Tool
  • Socket Spring Loaded Dual
    Sockets
    #8 Spring Loaded Dual Socket
  • Drive End Torque Wrench Hex Flare Offset
    Torque Wrenches
    #12 Torque Wrench with Hex
    Flare Offset Drive End
  • Male Hex Drive V-Bottom Extended Adapter
    Drive Ends
    #19 V-Bottom Extended Adapter
    with Male Hex Drive
  • Adapter for Air Muffler
    Crowfoot Adapters
    #9 Air Muffler Adapter
  • Square Drive Hex Driver
    Sockets
    #19 Hex Drive with
    Square Drive
  • Adjustable Force Pneumatic Nut Install Tool
    Assembly & Installation
    #14 Pneumatic Nut Install
    Tool with Adjustable Force
  • Removal Tool Hand Clip
    Assembly & Installation
    #22 Hand Clip Removal Tool
  • Pneumatic Hose Clamp Tool Bench Mounted
    Hose Clamp Tools
    #2 Bench Mounted Pneumatic
    Hose Clamp Tool
  • Fixture Holding
    Fixtures
    #14 Holding Fixture
  • Removal Tool Freeze Plug
    Assembly & Installation
    #4 Freeze Plug Removal Tool
  • Fixture Rear Axle Sway Bar
    Fixtures
    #9 Rear Axle Sway
    Bar Fixture
  • Threaded Rod T-Handle
    Assembly & Installation
    #27 T-Handle with Threaded Rod
  • Tool Spreader
    Assembly & Installation
    #31 Spreader Tool
  • Torque Wrench Holding Offset
    Torque Wrenches
    #23 Offset Holding
    Torque Wrench
  • Hand Tool Clip Removal
    Assembly & Installation
    #28 Clip Removal Hand Tool
  • Brake Tester Hand Park
    Assembly & Installation
    #26 Hand Park Brake Tester
  • Fixture Front Brake Line
    Fixtures
    #10 Front Brake Line Fixture
  • Handle Square Drive
    Assembly & Installation
    #15 Square Drive with Handle
  • Tool Clip
    Assembly & Installation
    #24 Clip Tool
  • Tips Interchangeable Hose Clamp Tool
    Hose Clamp Tools
    #3 Interchangeable Hose
    Clamp Tool Tips
  • Plastic Scrivit Pneumatic Install Tool
    Assembly & Installation
    #34 Pneumatic Plastic Scrivit
    Install Tool
  • Operator Hose Clamp Fixture
    Fixtures
    #3 Hose Clamp Fixture
    with Operator
  • Fixture Park Brake Lever Assembly
    Fixtures
    #6 Park Brake Lever
    Assembly Fixture
  • Drive End Cam Adjust
    Drive Ends
    #20 Cam Adjust Drive End
  • Pipe Wrench Drive End Torque Wrench
    Torque Wrenches
    #4 Torque Wrench with Pipe
    Wrench Drive End
  • Female Torx Drive End Maxi-Break Torque Wrench
    Torque Wrenches
    #10 Maxi-Break Torque
    Wrench with Female
    Torx Drive End
  • Adjust Tool Door Glass
    Assembly & Installation
    #8 Door Glass Adjust Tool
  • V-Bottom Drive End Offset Extended
    Drive Ends
    #29 Offset Extended
    V-Bottom Drive End
  • Enclosure Install Tool Gas Fill Door
    Assembly & Installation
    #25 Gas Fill Door Enclosure
    Install Tool
  • Crowfoot Holding Wrench Adapter
    Crowfoot Adapters
    #5 Holding Wrench Adapter
  • Tool Belt Tensioning
    Assembly & Installation
    #16 Belt Tensioning Tool
  • Insert Hand Tool
    Assembly & Installation
    #3 Hand Tool for Insert
  • Spline Socket Steering Column
    Sockets
    #3 Steering Column
    Spline Socket
  • Install Tool Pneumatic Drum Handle
    Assembly & Installation
    #10 Pneumatic Drum Handle
    Install Tool
  • Spring Install Tool Pneumatic Door Hinge
    Assembly & Installation
    #6 Pneumatic Door Hinge
    Spring Install Tool
  • Torx Bit for Rounded Fasteners Top Ink Marker Torque Wrench
    Torque Wrenches
    #11 Top Ink Marker
    with Torx Bit for
    Rounded Fasteners
  • Nylon Sleeve Lug Nut Socket
    Sockets
    #23 Lug Nut Socket
    with Nylon Sleeve
  • Drive End Special
    Drive Ends
    #7 Special Drive End
  • Torque Wrench Top Ink Marking
    Torque Wrenches
    #15 Top Ink Marking
    Torque Wrench
  • Drive End Special
    Drive Ends
    #26 Special Drive End
  • Paint Marking Electronic Signal Torque Wrench
    Torque Wrenches
    #22 Electronic Signal Paint
    Marking Torque Wrench
  • Socket Tail Light
    Sockets
    #17 Tail Light Socket
  • Puller for Transmission Shaft Seal
    Assembly & Installation
    #35 Transmission Shaft
    Seal Puller
  • Drive End Offset Extended Box
    Drive Ends
    #23 Offset Extended
    Box Drive End
  • Nylon Sleeve Antenna Socket
    Sockets
    #22 Antenna Socket
    with Nylon Sleeve
  • Shank Converter Square Drive
    Crowfoot Adapters
    #4 Square Drive to
    Shank Converter
  • Socket Top Ink Marking Torque Wrench
    Torque Wrenches
    #3 Top Ink Marking Torque
    Wrench with Socket
  • Tool Jam Nut
    Torque Wrenches
    #20 Jam Nut Tool
  • Jam Nut Adapter Tie-Rod
    Drive Ends
    #25 Tie-Rod Jam Nut Adapter
  • Install Tool Push Pin
    Assembly & Installation
    #7 Push Pin Install Tool
  • Open End 12 Point Crowfoot
    Crowfoot Adapters
    #6 12 Point U-Bottom
    Crowfoot
  • Handling Hook Front Axle
    Material Handling
    #4 Front Axle Handling Hook
  • Removal Hand Hose Clamp Tool
    Hose Clamp Tools
    #9 Hand Hose Clamp
    Removal Tool
  • Socket Spring Loaded Wobble
    Sockets
    #13 Spring Loaded
    Wobble Socket
  • Adjustable Tension Pressure Roller
    Assembly & Installation
    #23 Pressure Roller with
    Adjustable Tension
  • Torque Wrench Glass Adjustment
    Torque Wrenches
    #5 Glass Adjustment
    Torque Wrench
  • Install Tool Pneumatic Snap Ring
    Assembly & Installation
    #5 Pneumatic Snap Ring
    Install Tool
  • Adjusting Tool Camber
    Torque Wrenches
    #2 Camber Adjusting Tool
  • Hand Tool Special
    Torque Wrenches
    #16 Special Hand Tool
  • Drive End Control Arm
    Drive Ends
    #18 Control Arm Drive End
  • Torque Wrench Transmission Plug
    Assembly & Installation
    #29 Transmission Plug
    Torque Wrench
  • Special Sockets Yankee Screwdriver
    Sockets
    #7 Yankee Screwdriver
    with Special Sockets
  • Holding Tool Water Pump
    Material Handling
    #8 Water Pump Holding
    Torque Wrench
  • Socket Special
    Sockets
    #14 Special Socket
  • Drive End Brake Line
    Drive Ends
    #8 Brake Line Drive End
  • Hose Clamp Tool Plier
    Hose Clamp Tools
    #11 Plier Hose Clamp Tool
  • Speeder Drive End Punch Marking Torque Wrench
    Torque Wrenches
    #13 Punch Marking Torque
    Wrench with Speeder
    Drive End
  • Install Tool Pneumatic Bumper Nut
    Assembly & Installation
    #12 Pneumatic Bumper Nut
    Install Tool
  • Installation Transmission Seal
    Assembly & Installation
    #33 Transmission Seal Installer
  • Tool Hand Hose Clamp
    Hose Clamp Tools
    #10 Hand Hose Clamp Tool
  • Spanner Drive End Torque Wrench
    Torque Wrenches
    #6 Torque Wrench with
    Spanner Drive End
  • Drive End Axle to Transmission Gauge
    Drive Ends
    #13 Axle to Transmission
    Gauge Drive End
  • Square Drive Slotted Nut Driver
    Sockets
    #6 Slotted Nut Driver
    with Square Drive
  • Fixture Steering Shaft
    Fixtures
    #7 Steering Shaft Fixture
  • Square Drive Nylon Sleeve Retaining Hex Socket
    Sockets
    #4 Retaining Hex Socket
    with Square Drive
    and Nylon Sleeve
  • Socket Heat Sensor
    Sockets
    #21 Heat Sensor Socket
  • Pin Deck Locating
    Material Handling
    #3 Deck Locating Pin
  • Drive End Spanner
    Drive Ends
    #16 Spanner Drive End
  • Female Square Drive Spanner
    Crowfoot Adapters
    #3 Spanner with Female
    Square Drive
  • Spacer Rear Curb Height Setting
    Fixtures
    #8 Rear Curb Height
    Setting Spacer
  • Table for Rear Axle Build-Up
    Fixtures
    #16 Rear Axle Build-Up Table
  • Special Offset Ratcheting Box Drive End
    Drive Ends
    #11 Ratcheting Box Drive
    End with Special Offset
  • Moving Battery Tool
    Material Handling
    #5 Battery Moving Tool
  • Tool Heat Shield Install
    Material Handling
    #7 Heat Shield Install Tool
  • Special Screwdriver
    Assembly & Installation
    #32 Special Screwdriver
  • Hose Clamp Tool Hand
    Hose Clamp Tools
    #1 Hand Hose Clamp Tool
  • Special Grip Ratcheting Torque Wrench
    Torque Wrenches
    #17 Ratcheting Torque
    Wrench with Special Grip
  • Holding Bracket Power Tool
    Material Handling
    #1 Power Tool Holding Bracket
  • Gage Tailpipe
    Fixtures
    #15 Tailpipe Gage
  • Indexing Driveshaft Tool
    Torque Wrenches
    #24 Driveshaft Indexing Tool
  • Socket Ink Marking Torque Wrench
    Sockets
    #2 Ink Marking Torque
    Wrench Socket
  • Slipper Torque Hand Tool T-Handle
    Torque Wrenches
    #9 T-Handle Slipper
    Torque Hand Tool
  • Socket Battery Terminal
    Sockets
    #12 Battery Terminal Socket
  • Nylon Housing Surface Drive Socket
    Sockets
    #1 Surface Drive Socket
    with Nylon Housing
  • Handling Hook for Rear Axle
    Material Handling
    #9 Rear Axle Handling Hook
  • Drive End Half Moon
    Drive Ends
    #12 Half Moon Drive End
  • Handling Hook for Automotive Frame
    Material Handling
    #11 Automotive Frame
    Handling Hook
  • Fixture for Automotive Instrument Panel Build-Up
    Material Handling
    #10 Automotive Instrument Panel
    Build-Up Fixture
  • ISO Adapter Heavy Duty U-Bottom Drive End
    Drive Ends
    #4 Heavy Duty U-Bottom
    Drive End with ISO Adapter
  • Support Stand Driveshaft
    Fixtures
    #13 Driveshaft Support Stand
  • Tool Scrivit Install
    Assembly & Installation
    #19 Scrivit Install Tool
  • Gauge Sunroof Height
    Fixtures
    #1 Sunroof Height Gauge
© 2003-2012 Van F. BELKNAP Co., Inc. • 29164 Wall Street, Wixom, MI 48393 • CALL 248-348-7800 • FAX 248-348-9821 • EMAIL sales@belknaptools.com