Electronic Torque Tester and Mechanical Loader

Catalog Link (PDF): [Page 02] [Page 03]

The Suretest Electronic Torque Tester is the next generation in a laboratory grade instrument that provides torque measurements with a user-friendly interface and a large LCD display.

Suretest Featetures:
Operator and application friendly. Large backlit LCD graphic display: 240 X 64 pixels. Memory for 3000 torque values plus date and time stamp. Keypad: six soft keys and five select keys. Modes: Track, Peak Hold, First Peak, Power Tool. Multiple languages: English German, French, Spanish. 8 engineering units: ft-lb., in-lb., in-oz., Nm, dNm, cNm, m-kg., cm-kg. Accuracy: 0.25% of indicated value. 0.5% unmatched calibration. Play & play smart transducers: Will work with any existing Digitest, Computest and Multitest single transducer. Manual, auto clear and timer clear selectable from 1-9 seconds.		External printer can mount on top of the tester. Auto switching 110-220 VAC 50/60Hz. Portable shielded instrument case, enhanced EMI shielded with sturdy aluminum construction. No visible screws, tilt up feet. 16-bit micro-controller @ 10 MHz. 1 Mb programming code. 4 Mb data and information setup. 16-bit A/D converter equal to 65535 steps of accuracy. 2 RS-232c serial ports: 1 for printer; 1 for PC. Tracking starts displaying at 0.1%; Peak hold at 1.0%; First peak & power tool at 7% of the maximum sensor range. Setup: High and low limits. Statistic Process Control (SPC) built in. CE mark approved: November 1998.

The Most Popular Calibration System: The Suretest 5000-ST is shown above with a 250 ft-lb. Mechanical Loader (250L-1), a 4-in-1 Transducer System (2000-400-02) and mounting bracket (2000-500-02). With the above bench top system, calibration of wrenches up to 250 ft-lbs. Is a snap. In addition, single transducers are available from 15 in-oz. To 2000 ft-lbs.

The Suretest can be used with a single transducer or as the principal component of a complete torque calibration system. It has versatile data acquisition capabilities including measurement storage, retrieval, statistical analysis and automatic downloading to an external computer / printer. Using precision torque transducers, the Suretest provides high speed monitoring of static or dynamic torque inputs. The statistical report (printout) includes a simple histogram for process monitoring. Two RS-232 ports are at the back of the unit for computer / printer interfacing. The Suretest operates directly from any AC power line between 110-220 VAC, 50-60 Hz without the need for switch selection. A hard-wired lithium battery keeps the internal memory and date-time clock operating for up to 10 years.

Wide Selection of Transducers:
Torque transducers, purchased separately, are available in ranges from 15 in-oz. to 2000 ft-lbs. and provide system readings with an accuracy of ± .25% of indicated value when calibrated with the Suretest. A special EEPROM chip is built into each torque transducer that identifies its range and maintains its calibration value. Any “Smart” transducer calibrated separately will maintain at least ± .5% or better accuracy.

Mechanical Loader Features:
Portable, no mounting required. Will load dial, micrometer, beam, electronic torque wrenches or pre-sets. Capacity to 250 ft-lbs. Weighs less than 50 pounds.		Use with any Belknap torque transducer from 20 in-oz. To 250 ft-lbs. Four cushion pads for adhesion to work surface without slipping. Large wheel for smooth cranking action.

Home • About Us • Contact Us • Product Search • FAQ's • Support • Downloads
Torque Products • Adapters • Hose Clamp Tools • Specialty Tools • Calibration & Repair
Product Warranties

Please send comments to sales@belknaptools.com
©2003-2008, Van F. Belknap Company, Inc.