(248) 348-7800

sales@belknaptools.com

Printer-Friendly VersionPrinter-friendly version


Printer-Friendly Version

Contact Us

Van F. Belknap Co., Inc.
29164 Wall Street
Wixom, MI 48393 USA
(248) 348-7800
sales@belknaptools.com

Printer-Friendly VersionNEED A SPECIALLY
DESIGNED TOOL?

You're at the right place! Belknap is the Leader in Specialty Torque Applications. Check out our Specialty Tools Gallery for a small sampling of what we've produced for our customers over the years.

SIGNAL SENDING INTERCHANGEABLE DRIVE
Preset Torque Wrenches

Electronic Signal Sending Torque Wrench

Belknap Signal Sending Torque Wrench with Cable ConnectionBELKNAP’S PRESET SIGNAL SENDING INTERCHANGEABLE DRIVE TORQUE WRENCHES are the wired version of
our Preset Standard Interchangeable Drive Torque Wrenches with a 24 VDC switch mounted internally that allows the torque wrench to be tied into any monitoring system for torque verification (you supply the + voltage in one side, we will return it when the switch is made, torque achieved.) They are designed specifically to be used in conjunction with our Standard Interchangeable Drive Ends. Various cables are available in different sizes and configurations to suit your application. Read more about our Preset Torque Wrenches. 

CALIBRATION PROCEDURES:  View as PDF

If you are in need of a specially designed torque wrench, give us a call (248) 348-7800 to discuss your specific requirements. Our Specialty Tools Gallery displays a small sampling of what we’ve produced for our customers over the years.


Convert the below torque values to your specific unit of torque:

Signal Sending Interchangeable Drive Preset Torque Wrenches

Part # Min Torque
(Ft. Lb.)
Max Torque
(Ft. Lb.)
Shank Size Length
(In.)
Weight
(Lb.)
VBEL10T-I 3 9 J 7 0.75
VBEL10AT-I 7 25 J 8 0.88
VBEL50T-I 10 50 J 12 1.5
VBEL100T-I 45 150 Y 20.5 2.5
VBEL200T-I 45 200 Y 25 2.6

Please feel free to call us for any reason (248) 348-7800. We look forward to speaking with you.

  • Drive End Torque Wrench Hex Flare Offset
    Torque Wrenches
    #10 Torque Wrench with Hex
    Flare Offset Drive End
  • Hand Tool Special
    Torque Wrenches
    #13 Special Hand Tool
  • Rubber Install Tool Cup Holder
    Material Handling
    #6 Cup Holder Rubber
    Install Tool
  • Socket Top Ink Marking Torque Wrench
    Torque Wrenches
    #3 Top Ink Marking Torque
    Wrench with Socket
  • Drive End Half Moon
    Drive Ends
    #12 Half Moon Drive End
  • Drive End Special
    Drive Ends
    #25 Special Drive End
  • Fixture Rear Axle Sway Bar
    Fixtures
    #9 Rear Axle Sway
    Bar Fixture
  • Drive End Flare Nut Half Moon
    Drive Ends
    #10 Flare Nut Half
    Moon Drive End
  • Support Stand Driveshaft
    Fixtures
    #13 Driveshaft Support Stand
  • Special Offset Adapter Torque Wrench
    Torque Wrenches
    #16 Torque Wrench with
    Special Offset Adapter
  • Drive End Pipe Wrench
    Drive Ends
    #6 Pipe Wrench Drive End
  • Fixture Thread Checker Holding
    Fixtures
    #2 Thread Checker Holding
    Fixture
  • Operator Hose Clamp Fixture
    Fixtures
    #3 Hose Clamp Fixture
    with Operator
  • Torque Wrench Transmission Plug
    Assembly & Installation
    #22 Transmission Plug
    Torque Wrench
  • Drive End Non-Marring Pipe Wrench
    Drive Ends
    #23 Non-Marring Pipe
    Wrench Drive End
© 2003-2018 Van F. BELKNAP Co., Inc. • 29164 Wall Street, Wixom, MI 48393 • CALL 248-348-7800 • FAX 248-348-9821 • EMAIL sales@belknaptools.com